MM33

The MM 33 is a small and compact micromanipulator for manual manipulation in all three axes (x-,y-and z). The scales on the slides allow reading of the coarse adjustment with an accuracy of 0.1 mm. The additional x-axis fine control is achieved with a micrometer screw with a resolution of 1/lOOmm. The range of travel is 37 mm in the x-axis, 20 mm in the y-axis and 25 mm in the z-axis. The fine control has a travel of 10 mm. Since all controls are mounted in line on the rear, several manipulators may be used closely spaced side by side without any problems. The micromanipulator is suppiled either with a 1/2" clamp for bar attachment a 80 degree tilting base. To avoid a drift of the manipulator while working with a higher load, the MM 33 can be delivered with an additional brake for the Z-axis (Z-axis stop).
Weight :650g
MM 33 right with clamp 1/2" MM 33 left with clamp 1/2" MM 33 right with tilting device MM 33 left with tilting device Additional Z-axis stop	Part - No: 00-42-101-0000 Part - No: 00-42-102-0000 Part - No: 00-42-103-0000 Part - No: 00-42-104-0000 Part - No: 00-45-201-6000

To Home Page

enquiries@intracel.co.uk