MMJ

The micromanipulator MMJ is equipped with coarse and fine adjustment controls for X-, Yand Z - axes. In addition it has a joystick controlled motion for the X- and Y- axes. The motion control through the joystick can be adjusted from 0.35 mm to appr. 4 mm travel over the full extension of the joystick adjustment range. The toolholder can be tilted by 90 degrees.
The Z axis coarse and fine displacement ratio of 10:1 allows rapid motion for the tool changing assembly as well as precise positioning under high magnification. An adjustable stop allows the exact repositioning of the tool in the Z axis.

Weight :650g
Displacement range:
  • x-Axis =37mm
  • y-Axis =20mm
  • z-Axis =25 mm
  • Joystick =0,35-appr. 4mm

  • MMJ right hand operation with 1/2" clamp
  • MMJ left hand operation with 1/2" clamp

  • Part - No: 00-42-107-0000
  • Part - No: 00-42-108-0000

    • To Home Page

    Feedback Form

    enquiries@intracel.co.uk